Counterweight: Difference between revisions
No edit summary |
mNo edit summary |
||
Line 3: | Line 3: | ||
The counterweight operator should give warnings to people on stage by shouting '''"Heads on stage"''' and '''"Chins on stage"''' loudly when flying the CW bar in and out. | The counterweight operator should give warnings to people on stage by shouting '''"Heads on stage"''' and '''"Chins on stage"''' loudly when flying the CW bar in and out. | ||
Counterweight flying is needed in Get-ins and get-outs to allow the rigging and focusing of lighting bars as well as for set. Counterweights may also be flown during the show for scene changes. In these situations, a [[Dead|Dead]] is extremely useful. | Counterweight flying is needed in Get-ins and get-outs to allow the rigging and focusing of lighting bars as well as for set. Counterweights may also be flown during the show for scene changes. In these situations, a [[Dead|#Dead]] is extremely useful. | ||
A counterweight system exists in the ADC; operators must be trained by management or appropriately trained students. | A counterweight system exists in the ADC; operators must be trained by management or appropriately trained students. |
Revision as of 06:21, 10 August 2022
In a typical counterweight fly system, an arbor (carriage) is employed to balance the weight of the batten and attached loads to be flown above the stage. The arbor, which carries a variable number of metal counterweights, moves up and down vertical tracks alongside an offstage wall. In some lower-capacity fly systems, cable guide wires are used instead of tracks to guide the arbors and limit their horizontal play during vertical travel (movement).
The counterweight operator should give warnings to people on stage by shouting "Heads on stage" and "Chins on stage" loudly when flying the CW bar in and out.
Counterweight flying is needed in Get-ins and get-outs to allow the rigging and focusing of lighting bars as well as for set. Counterweights may also be flown during the show for scene changes. In these situations, a #Dead is extremely useful.
A counterweight system exists in the ADC; operators must be trained by management or appropriately trained students.